VALUE VMV-1 VACUUM GAUGE 0~10KPA
Details
-
In Stock Unit:Each
Description
Intelligent digital vacuum gauge Laboratory refrigeration system vacuum inspection vacuum gauge VMV-1
The VMV-1 built with Pirani's professional vacuum sensors can precisely measures the vacuum level. From the measurement, you can therefore gather information about humidity and the removal of foreign matter (oil, foreign gases, etc.), and thus know the best status to fill refrigerants. VMV-1 can be used for monitoring vacuum system, leaking detection and distinguish the pump in quality.
Instrument overview:
1) 1/4" Flare
2) Power on/Off/Backlight
Unit: Unit selection/Add value in Set Mode
Set: Long press the button into Alarm Set Mode
Save/Cal: Save alarm value/Full scale calibration/ Zero Calibration in Set Mode
3) Display (Vacuum degree, Units and Battery capacity)
4) Battery cover (3x AA batteries)
Features:
- Ergonomic Design
- High-precision Vacuum Sensor
- Buzzing Remind
- Large screen backlight electronic display
Technical Parameters:
Maximum overload pressure: 14PSI/0.1 Mpa
Range: 0~10,000Pa, 0~100.00mBar, 0~75.000mmHg, 0~75,000Microns
Resolution: 0.01 (<10pa), 0.0001 (<10mBar), 0.0001 (<10mmHg), 1 (<30000 Micron)
Measurement accuracy: 2-100Pa (degree ± 5%)
Operating temperature: 0-50°C
Battery Life: 45 hours (3pcs AA battery) not included
Units: Pa, mBar, mmHg.Microns
Refresh rate: 0.5 seconds
Sensor: Pirani sensor
Automatic shutdown: 10 minutes
Backlight: 20 seconds
Beep Horn: 90 dB, closes after 10 seconds
Weight: 125G (without batteries)
Application: Atmospheric environment ( It can not be measured in the presence of refrigerants and other gas environments)
