LEAK LOCK 4Oz Tub w/Brush JOINT SEALANT
Details
-
In Stock Unit:Each
Description
Leak lock join sealant Compound
Pipe joint sealant for all threaded material. Water, gasoline, propane, many chemicals.
Leak Lock is a state-of-the-art high-strength pipe joint sealant consisting of chemically resistant film formers, plasticers, reinforcing fillers and solvents.
Features:
- A resin based brushable paste which remains permanently flexible, adheres to internal surfaces and fills voids
- Ideal for metal and plastic materials subject to extreme vibrations
- Effective in temperatures from -200°F (-93°C) to 400°F (204°C), full vacuums and pressures to 10,000 PSI
- Never hardens and never becomes brittle
- Sticks to all clean surfaces
- 4 ounce brush top jar
- Non-toxic
Specification:
| Pressure: | Full vacuum to 10,000 PSI |
| Consistency: | Flowable Paste |
| Shelf Life: | Indefinite when sealed |
| Temperature Range: | -200°F to 400°F (-93°C to 204°C) |
Applications:
| Pipe joint sealant |
| Ideal for joining all metals, plastics and other materials |
| Prevents vibration from loosening nuts, bolt, or fittings |
Leak Lock can be used on all metal or plastic materials, including but not limited to, aluminum, aluminum alloys, cast irons, copper, copper alloys, (brass, bronze, etc.), magnesium and magnesium alloys, carbon steels, stainless steels, galvanized surfaces, PVC, CPVC, ABS, fiberglass, black polypropylene, and kynar. Leak Lock should be applied to threaded joints, flanged joints, gasket surfaces and all mating surfaces where a fluid-tight seal is required.
Leak Lock seals a broad range of chemicals including all refrigerants such as R-12, R-22, R-502, R-134A, etc., all CFC, HFC and HCFC refrigerants, petroleum products, natural and manufactured gases, steam, water, air, etc. No other sealant offers the application range of Leak Lock. Use alcohol as a cleansing solvent prior to setting.
Product Specifications
What is Leak Lock?
Leak Lock is a state-of-the-art high strength, pipe joint sealant consisting of chemically resistant film formers, plasticers, reinforcing fillers and solvents .
How it works
When Leak Lock is applied to pipe joints, it adheres to the mating surfaces. After joints are assembled, Leak Lock sets to form a chemically resistant flexible fluid-tight seal.
How to Use it
Leak Lock should be applied to clean joint surfaces, either with the applicator brush or any convenient spatula. Apply Leak Lock to both mating surfaces. Tack should be allowed to develop before joints are assembled.
Where to use it
Leak Lock can be used on all metal or plastic materials, including but not limited to, aluminum, aluminum alloys, cast irons, copper, copper alloys, (brass, bronze, etc ...), magnesium and magnesium alloys, carbon steels, stainless steels, galvanized surfaces, PVC, CPVC, ABS, fiberglass, black polypropylene, and kynar. Leak Lock should be applied to threaded joints, flanged joints, gasket surfaces and all mating surfaces where a fluid-tight seal is required. Special Applications - Leak Lock is ideal for joining dissimilar metals and materials. Prevents loosening of nuts, bolts, plugs and fittings. Call Highside for specific applications and compatibility.
Typical Physical Properties
- Viscosity ...... 25,000-100,000 cps
- Consistency ...... flowable Paste
- Color ...... light Blue
- Solvent ...... ethanol and isopropanol
- Pressure ...... full vacuum to 10,000 psi
- Temperature ...... -200°F to +400°F
- Toxicity ...... non-toxic
- Shelf Life ...... Indefinite when kept Sealed
Contains Teflon®
Leak Lock: Successes-
The following is a partial list of the materials and fluids that Leak Lock has successfully sealed:
All CFCs, HFCs and HCFCs Including But Not Limited To... |
|
Fuel Gasses |
|
Fuels |
|
Refrigeration Oils |
|
Solvents |
|
Industrial Gases |
|
Oils |
|
