LEAK LOCK PVC CEMENT PRIMERLESS 4OZ CAN
Stock Code:
HS10604
Regular Price: $29.46 (inc GST)
Regular Price:
$29.46 (inc GST)
Price:
$27.01 (inc GST)
Quantity Breaks
1+
$27.01 (inc GST)
Details
-
In Stock Unit:Each
Description
LEAK LOCK ONE STEP PVC CEMENT 4 OZ.
REPLACES Over 12 Other Products for Scope and Performance!
The Most Important Breakthrough in Solvent Weld Technology in Over 30 Years!
Multi-purpose, one step PVC cement. All weather, low VOC Blue medium Bodied PVC cement.
Features/Benefits
- Fast setting, One Step Cement
- Suitable for all weather conditions
- Works well on wet or dry pipe
- Allows for immediate pressure testing
- Meets ASTM D2564
- Great for Flexible PVC Pipe
Specifications:
| Color / Consistency: | Blue / Medium Bodied |
| Temperature Range: | 0°F to 120°F (-18°C to 49°C) |
| Pressure Range: | 0 to 300PSI |
| Set-up Time: | Approx. 20 Seconds |
| Cure Time: | 24 Hours |
Applications:
Highside PVC Cement
Directions For Use
- Cut the pipe square and remove all burrs.
- Check fitting of pipe. If too loose or too tight, pipe should not be used. Ideal fit between pipe and fitting before cementing allows pipe to enter to full depth of socket easily.
- Remove all dust, moisture, grease, oil and any other foreign material from pipe and fitting. “MULTI-PURPOSE ONE-STEP PVC CEMENT” is designed for use without a primer. If primer is required by local code - product can be used with purple primer.
- Apply enough cement uniformly to pipe and fitting to form a bead of cement at outside end of pipe. Prevent excess cement from forming on bare inside walls of pipe.
- Brush “MULTI-PURPOSE ONE-STEP PVC CEMENT” generously on the outside of the pipe to the depth of the fitting. Do not thin cement with primers or cleaners.
- Immediately after “MULTI-PURPOSE ONE-STEP PVC CEMENT” is applied, insert pipe to the bottom of the socket, using a quarter twisting motion, and hold in place 30 seconds until cement sets. Assemble parts QUICKLY. If cement is not fluid, re-coat both parts and repeat procedure.
- Remove excessive “MULTI-PURPOSE ONE-STEP PVC CEMENT” with a dry cloth only.
- Allow about 4 minutes for good handling strength. Allow 4 hours for high strength. For best quality joints, remove water or moisture from pipe and fitting and allow 2-24 hours cure time. Cure time before testing depends on size, fit, temperature and pressures. Meets NSF® standards 14 and 61, refer to ASTM Spec. D2564, for recommended set and cure time.
- Keep container closed at all times when not using to avoid moisture absorption and vapor losses. Keep “MULTI-PURPOSE ONE-STEP PVC CEMENT” from freezing.
- Brilliant blue color allows you to see application.
- Follow all recommended procedures for joining PVC pipe and fittings as stated in ASTM Spec. D2564.
