ACTRON SINGLE ZONE CONTROL KIT 24HR 240V
Details
-
In Stock Unit:Each
Description
Description and method of control
A three piece control, comprising a Wall Control, Relay Module and Duct Sensor to maintain individual zone temperature.
On a call for heating the damper can open if the supply air is warmer than the room temperature. Damper closes 0.5°C below SP.
On a call for cooling the damper can open if the supply air is cooler than the room temperature. Damper closes 0.5°C above SP.
Location of the Wall Control, duct sensor and option remote room sensor.
Wall control or optional remote wall sensor should be fixed to internal flat wall surface at approximately 1.5 metres above the floor level to sense the air at average room temperature. Avoid locations in direct sunlight, hot or cold drafts. Duct sensor should be located before zone damper to sense the supply air temperature, extend sensor cable if required.
