SPEEDGAS Pure Argon - E Size
Details
-
In Stock Unit:Each
Description
NEW CYLINDER INCLUDES FIRST REFILL - CYLINDERS ARE NOT REFUNDABLE ONCE PURCHASED - SIMPLY SWAP THE CYLINDER WHEN EMPTY AND PAY REFILL PRICE ONLY
Please note THIS LISTING IS FOR THE E cylinder
Argon 02
Argon 02 is an oxygen, argon based gas mixture with a medium active gas content. The is inert, non-toxic, colourless and odourless. Supplied in high pressure metal cylinders and packs where available.
Typical Uses
- MIG welding of stainless steel
Description
Argon 02 is an oxygen, argon based gas mixture with a medium active gas content. The is inert, non-toxic, colourless and odourless. Supplied in high pressure metal cylinders and packs where available.
Argon 02 is offered to customers using GMAW for most high alloy for most high alloy and austenitic stainless steel across a wide range of material thickness. Argon 02 for these applications may be more economical than Ar / He/ COâ mixtures and fit for purpose.
Typical Uses
- MIG welding of stainless steel
Physical Characteristics
Appearance/Odour:
- Colourless and Odourless
- Relative Density (Air = 1): 1.4
- Molecular Weight: 39.8
- Density of gas @ 15°C,101.33kPa:
- 1.69Kg/m3
Main hazards
- Compressed high pressure gas in cylinders
- Asphyxiant in high concentrations.
Height includes the valve
Container sizes may vary from state to state.
Storage and handling
Ensure adequate ventilation for all cylinders and packs. Secure single cylinders in upright position and protect valves and manifolds from accidental damage.
- Keep cylinders and packs in a cool area away from all sources of heat.
- Open cylinder valve slowly.
- Close all valves when not in use.
- Ensure all regulators and other devices attached to the cylinder outlets are free from oil and grease, and able to withstand contents pressures. Check for leaks regularly.
- Do not store cylinders in an area where any leaking gas could accumulate.
- If valve is damaged, do not attempt to operate.
- If valve does not operate by hand, return the cylinder to the supplier (attach a “faulty” tag).
N.B. Only regulators, manifolds and ancillary equipment, rated for the appropriate pressure and compatible with the relevant gas, shall be connected to or downstream of these cylinders.
In case of leaks
- If cylinder or pack is suspected of leaking, evacuate personnel from the direction in which the gas is likely to flow. Stop leak if possible.
- Major leaks should only be approached with breathing apparatus.
- If possible and if safe to do so, remove leaking cylinder or pack to a safe area outdoors and allow contents to empty into atmosphere.
- Return empty cylinders and pack to supplier with a note to confirm the leak occurred
- Notify emergency services if required
